| Soundmasking.com is the web site of Dynasound, Inc., the industry leader in soundmasking since 1975. Dynasound is a process driven organization that provides turn-key soundmasking solutions tailored to the requirements and characteristics of each environment. While the term has evolved into the single word “soundmasking”, all three terms; “masking sound”, “sound masking” (two words), and “soundmasking” are grammatically correct. Sometimes confused for "white noise" and "pink noise", sound masking is a low-level, broadband sound precisely contoured to mask (cover up) unwanted background noise and distracting speech. This custom tailored sound is introduced into the office environment through a sound masking system inconspicuously located above the ceiling or under an access floor system. Specialized eavesdropping protection systems by Dynasound protect sensitive conversations from deliberate eavesdroppers. Dynasound is dedicated to providing cost-effective, single-source commercial sound masking and audio security. |
Dynasound networked sound masking systems
- Dynasound DS3008 sound
masking processors provide eight
balanced inputs for paging and
music. Four internal, non-coherent,
sound masking generators and a 12
x 8 matrix mixer provide output to
eight network audio channels.
- Dynasound DS8000 network
speaker controllers are PoE
powered, eight channel network
audio receivers. Each DS8000
contains four internal, non-coherent,
sound masking generators. Full DSP
allows the DS8000 to receive
broadcast, dual channel, sound
masking as well as providing
internally generated sound masking.
Every speaker connected to the
DS8000 has individual control for
volume and channel.
- Dynasound DS1356 speakers are
designed to be used above
suspended ceilings and in open
structure facilities. These speakers
are identical in appearance to
Dynasounds 70 volt DS1338
speakers.
- Dynasound DS1404 programmable
level controller adjusts sound
masking levels, or other audio
signals, based on time of day and
day of the week.
- Industry standard switches are
used. All network cabling is standard
cat-5 wiring. Individual speaker
connections are done with 18 AWG
two conductor plenum rated wire.